三级在线观看网站-三级在线国产-三级在线网站-三级中文字幕-九九久久国产精品免费热6-九九久久精品这里久久网

ZAZQ,ZAZX Confluence Shunt Temperature Regulating Valve product description

ZAZQ,ZAZX Confluence Shunt Temperature Regulating ValveFeatures

1, the direction of the fluid on the role of the spool are in a flow state, so the work of good stability. 
2, In addition to the valve cover bushing at the guide, the spool side and the valve seat inner surface also has the role of guide, guide the area, reliable work. 
3, the servo amplifier uses deep dynamic negative feedback, can improve the regulation accuracy. 
4, electric operator has many forms, applicable to 4 ~ 20mA.DC or 0 ~ 10mA.DC. 
5, electronic electric control valve can be directly controlled by the current signal valve opening, without servo amplifier. 
6, save automation investment, and single-seat, two-seater or sleeve valve compared to form the same system can save a valve to simplify the system and save investment. 
7, the bellows seal on the movement of the valve stem to form a complete seal, blocking fluid leakage.

ZAZQ,ZAZX Confluence Shunt Temperature Regulating Valve part Information:

Body, bonnet: HT200, ZG230 ~ 450 ZG1Cr18Ni9Ti 
Spool, seat: 1Cr18Ni9Ti Stellite alloy surfacing 
Filler: Teflon 
putter, bushing: 2Cr13

ZAZQ,ZAZX Confluence Shunt Temperature Regulating Valve technical Parameters:

ZAZQ,ZAZX Confluence Shunt Temperature Regulating Valve connection standard:

◆ connection size and standard
· Flange standard: cast iron flange according to GB4216.5-84 steel flange according to GB9113-88, JB / T79-94 
· Flange sealing surface type: PN10, PN16 is convex PN40, PN64 is convex Surface, the valve body is concave 
· Structure length: GB12221-89 
· Jacket insulation jacket Heat transfer body interface: Butt welding ф18X4 
* The body flange and the flange end face distance can be manufactured according to user-specified standards. 
Such as ANSI, JIS, JPI and other standards. 

◆ Ordering Information: 
When ordering, please provide the following information: 
· Control valve name and model 
· Nominal diameter (mm) 
· Nominal pressure (MPa) 
· Rated flow coefficient (KV) 
· Inherent flow characteristics 
· Media name, Temperature, flow rate, etc. 
· Mode of operation of the whole machine (power ON / OFF) and input signal 
· Valve body, trim and packing material 
· Accessories (manipulator, servo amplifier, etc.) 
· Other special requirements